57
hardware setup
1 Classé Delta Series Products
Two or more Classé Delta and/or CT series products are required, at least one
of which must have a touchscreen display.
2 Category 5 Network Cables
These are ordinary network cables, commonly used for broadband Internet
connections. They should be typical “straight through” cables not the “crossed
over” type, and the total required will be one less than the total number of
Delta and/or CT series components in your system.
3 CAN-Bus Terminator
A CAN-Bus Terminator will be required. It is inserted into the CAN-Bus
OUT connector of the last component in the CAN-Bus daisy chain. One
is
included in the box with your SSP. T
hey are also available free of charge
from your nearest Classé Customer Support Center
http://www.Classeaudio.com/support/service.htm
The diagram below illustrates how to connect the CAN-Bus hardware.
Any combination of models in any order.
OUT
CAN-BUS
IN
OUT
CAN-BUS
IN
OUT
CAN-BUS
IN
OUT
CAN-BUS
IN
NOTE: Daisy chain must be terminated with CAN-Bus Terminator.
