11
Front Panel
1
Standby button & LED indicator
The front panel
Standby
button will toggle the amplifier between operate,
its fully operational state, and a
standby
mode that leaves the amplifier off,
yet ready to respond to system commands via any of the supported control
options (e.g. IR input, DC trigger, CAN-Bus, or RS-232).
The current state of the amplifier is indicated by the
LED
indicator in the
Standby
button. The state of this
LED
indicates the following:
• on (dim red)
=
standby
• flashing blue (on power-up) =
initialization
• on (blue)
=
operate
•
flashing (after power-up)
=
AC mains voltage out of range
•
flashing (combined red/blue)
=
the air intake filter needs to be cleaned
•
slow flashing red
=
protection circuit(s) engaged
1
CA-M600
CT-M600
