CLAS OH 0014 Manual Download Page 7

OH 0014

AIR HYDRAULIC PUMP 10T 1/4"

SPECIFICATIONS

WARNING

This Air/Hydropneumatic Pump supplies hydraulic fluid pressure to selected tools. It consists of 

an in-line air and hydraulic cylinder. The ratio of hydraulic fluid pressure generated compared to 

supply air pressure is 100:1. 

In other words, 100 PSI out for every 1 PSI in 100 PSI input air pressure equals 10,000 PSI 

output pressure.

The air/hydraulic pump is capable of generating fluid pressure up to 10.000 PSI. Make certain 

the tool in use is held securely and is in proper working condition. Do not continue to operate 

the pump once the work is completed. Failure to comply with these instructions could  result in 

personal injury or damage to the equipment.

Depressing the release pedal causes a decrease in pressure and pressing the pump end of the 

pedal provides fluid pressure.

To prevent oil leak during shipment, a metal knob is installed and tightened to ensure the best 

sealing function. Loosen it counterclockwise before use.

Use only good quality hydraulic jack oil.

Never use brake fluid, transmission fluid, turbine oil, motor oil, alcohol, glycerin etc. Use of ether 

than good quality hydraulic oil will void warranty and damage the pump, hose, and application.

Never operate pump with release valve closed and disconnected from application.If operated 

in this condition, the hose and connections become pressurized. This increases burst harzard. 

Damage may occur to pump and its components.

Note: Always secure threaded port connections with non-hardening pipe thread compound. 

Tighten securely to prevent accidental removal of components while in use. Take care not 

to introduce compound into port orifices. Familiarize yourself with the specifications and 

illustrations in this operator's manual. Know your pump, its limitations and how it operates 

before attempting to use. Refer to specification chart on above for details of oil port thread 

size, usable oil capacity, and more.

Input Air 

Pressure ( 

psi)

Inout port 

thread 

(NPT)

Output 

port 

thread 

(NPT)

Oil delivery

(cu.in./min)

Internal 

relief 

setting 

(psi)

Reservior 

capacity

Usable oil 

capacity 

(cu.in.)

Weight 

(Ibs.)

L*W*H

0 psi

10 000 

psi

90-140

1/4"-18

1/4"-18

30

7,3

10 000

1/2 Gallon 98

18,7

10.3x5.3x7.3

Summary of Contents for OH 0014













Reviews: