5
English
Water selection
This iron can be used with normal tap water. However, if you live in an area of relatively
hard water, we suggest that you use distilled water.
Refilling
1. Set the steam control knob to and the temperature control knob to
min
.
2. Unplug the iron and let the soleplate cool down.
3. Fill the tank with water up to the max level mark.
Temperature setting
• Always check the fabric care label on your clothing.
• Always use the lowest recommended temperature setting if the fabric consists of
mixed materials.
1. Plug in the iron and stand it upright.
2. Turn the temperature control knob to the desired setting.
3. The indicator lamp will go off when the temperature has been reached.
The indicator lamp will come on and go off from time to time as the desired
temperature is maintained.
Spray feature
This function can be used at any time and does not affect the temperature setting.
Press the spray button (4) to spray a jet of water.
Steam ironing
This feature only works on the higher temperature settings.
●●
medium heat
●●●
high heat
1. Fill the steam iron with water if you have not already done so.
2. Plug in the iron and stand it upright.
3. Set the temperature control knob to
●●
or
●●●
.
4. The indicator lamp will go off when the temperature has been reached.
The indicator lamp will come on and go off from time to time as the desired
temperature is maintained.
5. Set the steam control knob (3) to the desired setting, steam will come out of
the holes in the soleplate.
Note:
Water can escape from the holes in the soleplate if the temperature setting is
too low. If this happens, set the temperature control knob (5) to
●●
or
●●●
. The steam
will return when the correct temperature has been reached.
Summary of Contents for YPF-6106 / Zebra
Page 2: ...2...
