5
English
Assembly
1. Prevent unintended starts by pulling out the plug from the mains before attaching
the blade assembly and glass jug to the motor unit. Check that the function
selector is in the
0
position.
2. Turn the glass jug upside down.
3. Place the rubber seal (7) on the bottom of the glass jug.
4. Place the blade assembly (8) onto the rubber seal. Be careful, the blades are sharp.
5. Screw on the locking ring (9) by turning it clockwise. Make sure that it is tight.
6. Place the glass jug onto the motor unit (2).
Things to consider before using the blender
Important:
Read this before using the product.
• Before the glass jug is placed on or removed from the motor unit, make sure
the blender is turned off and that no parts are rotating.
• Never shake the glass jug while using the blender. If ingredients get stuck
on the sides of the jug, shut off the blender and use a spatula, etc.
• Do not start the blender again before you have properly replaced the lid.
• The glass jug can withstand contents with temperatures up to 60 °C.
• Do not subject the glass jug to sudden changes in temperature as this might
cause the glass to crack.
Operating instructions
1. Place the assembled glass jug (1) onto the motor unit (2) and place the blender on
a flat surface.
2. Pour your ingredients into the glass jug.
3. Push the lid (4) firmly onto the glass jug.
4. Plug the mains lead into an electrical socket and switch the blender on by turning
the function selector (3) to an appropriate setting for the contents of the jug:
-
P
– The pulse setting only runs as long as the selector is held on the
P
mark.
Adapt the length of pulse to the consistency of the jug’s contents. This setting
can be used for crushing ice or items requiring a lot of power.
-
0
– Off
-
1
– For light, liquid ingredients.
-
2
– For blending solid foodstuffs and thicker liquids.
5. Turn the function selector to
0
and unplug the blender after use.
Important:
• Never run the blender for more than 3 minutes at a time. Let the motor cool down
a little before using it again.
• If frozen ingredients are to be blended, they must be blended immediately after
they have been placed in the jug. Otherwise there is a risk that the ingredients will
freeze together and jam the blades.
