Clas Ohlson YD-2266, Instruction Manual

Page: 5 / 24

5
English
Before initial use
Thoroughly clean all parts before using the product for the first time.
Refer to the
Care and maintenance
section.
Assembly
1. Prevent the product from starting accidentally by unplugging it from the mains
before attaching the blade assembly and plastic container to the motor unit.
2. Screw the blade assembly into the bottom of the container.
3. Fit the container onto the motor unit using the markings on the container and motor
unit as a guide. Make sure that the lugs are securely engaged in the notches.
4. Put the lid on the container.
Operating instructions
1. Add the ingredients to the container.
2. Make sure that the lid is on securely.
3. Plug the mains lead into an electrical socket and switch the blender on by
holding in [ ].
4. The motor will stop when the button is released.
Important!
• Never run the blender for more than 1 minute at a time.
Let the motor cool down a little before using it again.
• Never run the blender empty.
• If frozen ingredients are to be blended, they must be blended immediately
after they have been placed in the container. Otherwise there is a risk that
the ingredients will freeze together and jam the blades.
• Do not fill the container with hot liquid as the pressure build-up in the blender
can be too high.
Operating tips
General advice
• Always keep one hand on the lid when running the blender.
• Use extra caution when blending hot liquids.
Mixing solid foodstuffs into purée
• Add the food a little at a time. This is better than adding everything all at once.
Mixing solid foodstuffs
• Cut the food up into small pieces (2–3 cm) and feed them into the container gradually.
• Always add a little liquid to solid foodstuffs before starting to mix them. More liquid
can then gradually be poured into the container through the hole in the lid.