7
EN
GL
IS
H
4. Power switch
The power switch (9) has three settings:
•
I
On
•
0
Off
•
II
Power tool socket – The wet & dry vacuum starts and stops automatically when the machine connected
to the machine socket is turned on and off.
5. Power tool socket
The product has a power tool socket (10) which is intended for starting the wet and dry vacuum cleaner automatically.
• Connect the plug of a circular saw or similar machine to the power tool socket and then connect the suction
hose of the vacuum to the dust extractor port of the circular saw (or whatever power tool is connected).
Set the power switch to
II.
• The ON and OFF control of the wet and dry vacuum will now be controlled by the connected power tool.
The wet and dry vacuum will switch on as soon as the connected power tool has started and switch off
about 5 seconds after the connected power tool has been switched off.
N.B. The power tool socket must not be loaded with more than 1600 W.
