EN
G
LI
SH
4
Charging
The clipper must be charged before initial use or if it has not been used for
an extended period. A fully charged battery will last up to 30 minutes.
• Make sure that the product is switched off (power switch set to (“OFF”)
before inserting it into the charging station. The multi trimmer will not
charge if the power switch is set to the “ON” position.
• Connect the charger to a wall socket.
• The charge indicator on the hair clipper will light when charging is
in progress. When the battery is fully charged, the green LED will
come on.
• Before initial use the appliance should be charged for 24 hours.
Thereafter 12 hours.
• Do not store the clipper in the charging station.
• Unplug the charger from the power point when charging is complete.
Use
Replacing the cutter head
There are 4 replaceable cutter heads: beard trimmer, foil shaver, nose hair
trimmer and normal cutter head.
Using your thumb, push the
cutter head onto the appliance.
To remove the cutter head, extend it
and pull it off the appliance.
