11
English
Mirror
Flip
6.2 Open the film holder and attach the film strip
1. Hold down the film holder with one thumb as shown in the picture.
2. Push up the snap lock with the other thumb on the opposite side to
the “OPEN” marking.
3. Open the film holder.
4. Hold the negative up to the light; you must see the negative numbering the right
way round (not a mirror image).
NB:
Try to avoid getting fingerprints on the negative
strip; if possible, use thin cotton gloves. Blow off dust and dirt using compressed air
from a spray can designed for cleaning. Other suitable aids are also available, e.g.
a blower brush.
Or press [
►
] (turn image upside down).
NB:
The image mode can be changed
before scanning by pressing [
◄
]
(mirror image).
5. Mount the negative in the film holder.
Press down the negative strip so
that the perforation fits the guides in
the film holder.
Press the film holder together around
it. Make sure you mount the images
the right way round.
6. Set both controls [ Film scanner - Photo scanner ] (9) and (15) to
Film scanner
.
7. Guide the film holder into the feeder slot (18) with the white arrow first.
NB:
Sometimes not all images will fit into the film holder, and there will be a black
border on one side. This is because the film was wound on manually at varying
intervals in the camera, which means there may be errors in the scanner.
