E
N
G
LI
S
H
Use
Set time
1. Set the function
switch (1) to ”OFF” position.
2. Press and hold in the
Set time button (8) for 2 seconds. The time begins to blink on
the display.
3. Press one or more times on the
Set hours button (12) to set the hour. If you go
past the desired, you must go round again through zero.
4. Press one or more times on the
Set minutes button (13) to set the minute.
5. Press
Set time (8) again to confirm. The time appears (not blinking) on the display.
If no button is pressed for 8 seconds the clock returns to the normal position.
Listening to the radio
1. Set
function switch (1) to “ON”. The current band frequency appears for 10
seconds.
2. Adjust sound volume with the
volume control (14).
3. Press one or more times on the frequency selectors (12 & 13) to search manually
for a radio channel
4. Press and hold down either of the
frequency selectors (12 & 13) to automatically
seek a radio channel. Release button as soon as the search starts.
5. Set the
function switch (1) to ”OFF” position to switch off the radio.
Storing the radio channels in the memory
1. Switch on radio and tune in the desired radio channel as instructed in section
”Listening to the radio”.
2. Press once
Store in memory (10). ”M” indication begins to blink on the display.
3. Press any of the
Store buttons (3 to 8) to save in the storage space 1-5. To save
in the storage spaces 6-10 first press
5 button (8) and then on any of the
storage buttons. If no button is pressed for 8 seconds the clock returns to its normal
position.
Listening to stored channels
1. Switch on radio.
2. Press any of the
store buttons (3 to 8) to select channels 1 to 5.
3. First press button
Memory +5 and then on any of the store buttons to select
channels 6-10.
