E
N
G
LI
S
H
1. Free the mounting plate from the appliance by pressing in the two lock clips and at
the same time lift off the plate.
2. Attach the mounting plate as in the diagram but without the distance rings
(included). Use the longer screws if distance rings are used.
3. To Attach the appliance to the mounting plate first attach the hooks (1) and then
incline the appliance upward until the two clip locks (2) are firmly locked in place.
4. To remove the appliance simply reverses this sequence.
Place, x-ring on table
Fold out the two foot supports if the appliance is to be placed on a flat surface.
Use on table
Battery reserve
The clock radio has a battery reserve function: 2 pcs. 1.5 V-batteries (not included)
must be installed so that the time settings are not lost if there is a power failure.
Inserting the batteries:
1. Remove the battery cover on the back of the appliance by shoving it straight back.
2. Lift out battery cassette and insert 2x LR3/AAA-batteries. Be sure to position the
batteries correctly by following the polarity markings at the bottom of the battery
cassette.
3. Replace the battery cassette and battery cover.
4. Connect cord to wall socket.
NOTE! Always remove the batteries if the appliance is not going to be used for long
periods.
