7
E
n
g
li
s
h
2
14
OFF
ON
SD / MMC / MS
DC
USB HOST
OFF
ON
SD / MMC / MS
DC
USB HOST
OFF
ON
SD / MMC / MS
DC
USB HOST
OFF
ON
SD / MMC / MS
DC
OFF
ON
SD / MMC / MS
DC
USB HOST
OFF
ON
SD / MMC / MS
DC
USB HOST
OFF
ON
SD / MMC / MS
DC
USB HOST
OFF
ON
SD / MMC / MS
DC
4.3 Connecting the mains adaptor
1. Plug the included adaptor
into a wall socket.
2. Then plug the adaptor’s DC
connector into the socket
on the photo frame marked
“DC” (2).
3. Set the power switch on
the back of the photo frame
to the position
ON
to turn
on the device.
N.B.
• The [POWER] (15) button on the remote control is usually used to turn the photo
frame on or activate standby mode. To completely turn the frame off, the power
switch (14) on the back of the frame must be set to the OFF position.
• Always unplug the adaptor from the electrical outlet if the product is not be used
for an extended period.
4.4. Connecting a memory card or USB memory stick
N.B.
Only use one memory card at a time (except when copying).
Memory card
The following memory cards are compatible:
• Secure Digital (SD)
• Multimedia Card (MMC)
• Memory Stick (MS)
If your digital camera uses any of the above
mentioned memory cards you can connect
the camera’s memory card directly to the
photo frame.
1. Insert the memory card into the appropriate slot – “SD/MMC/MS” (13). Do not use
any force while inserting the memory card.
2. Remove the card by pulling it straight out.
N.B.
Do not remove a memory card
whilst data transfer is in progress.
USB memory stick
The “USB HOST” slot (4) can be used for connecting USB devices such as
USB memory sticks or MP3 players.
