8
English
Listening to preset radio stations
1. Press [ PRESET ] once.
2. Press [ SCROLL
▼
] or [ SCROLL
▲
] to select the desired station preset number.
3. If the preset hsa not been allocated a station, the display will show “Empty preset”
and the number of the preset.
Factory reset
Note:
All your preset stations will be erased during a factory reset.
If the clock radio has been moved over a long distance such as to another part of
the country, your pre-tuned and stored DAB stations might no longer be available.
If this is the case, you will need to reset the radio to its factory settings.
1. Turn the radio on by pressing the [ STANDBY/ON ] button.
2. Press and hold in [ MENU ] until “Press SELECT to confirm reset” appears on
the display.
3. Press [ SELECT ], the display will show “Restarting…” and once the restart is
complete the radio will enter standby mode.
4. Press [ STANDBY/ON ] to turn the radio back on again and start an automatic scan
for DAB radio stations.
Alarm settings
1. Press and hold in [ ALARM 1 ] or [ ALARM 2 ] until the display shows “Alarm Setting”
and the hour digit of the alarm time flashes.
2. Press [ SCROLL
▼
] or [ SCROLL
▲
] to set the hour and then confirm by pressing
[ SELECT ].
3. The minutes display will then begin flashing. Press [ SCROLL
▼
] or [ SCROLL
▲
]
to set the minutes and then confirm by pressing [ SELECT ].
4. The display will show “DAB Preset”. Press [ SELECT ] to select the type of
wake-up alarm:
-
DAB radio (press [ SCROLL
▼
] or [ SCROLL
▲
] to select the desired
station preset).
-
FM radio (press [ SCROLL
▼
] or [ SCROLL
▲
] to select the desired
station preset).
-
Buzzer (press [ SCROLL
▼
] or [ SCROLL
▲
] to select the buzzer tone).
-
Buzzer volume (press [ SCROLL
▼
] or [ SCROLL
▲
] to set the volume level of
the buzzer tone).
5. The settings are now ready to be activated.