background image

Risk of eye damage. 

Do not look directly at the light source.

The product is not suitable for illuminating a room.

The product is intended for indoor use only.

Class II mains adapter.

Class III strip light

Installation

 

Information

The LED strip light can be mounted using the double-sided adhesive tape (mounted).  
For best adhesion, ensure that the surface is clean, dry and free of grease.
The length of the light strip can be adjusted by cutting it at one of the soldering points 
which are spaced every 33 cm along its length.

Note:

 Once the strip light has been cut and shortened, it is no longer possible to 

extend it with additional strip lights.
1.  Strip light: Remove the protective film from the tape on the back of the light strip 

and attach it to a clean, grease-free surface. The strip light may also be screwed 
on with plastic clips.

2.  Connectors. Connect the strip light and the control box together.

Note:

 Make sure the strip light is connected in the right way, with the arrows 

pointing towards each other. Otherwise the strip light will not work.

3.  IR Receiver.

 

 

Note: 

Make sure there are no obstacles between the IR receiver on the LED 

control unit and the remote control.

4.  Control unit
5.  Connection cable: Connect the connection cable to the LED control unit.
6.  Mains adapter: Plug the mains adapter into an electrical outlet.

LED strip light extension set

Art. no: 36-7975 (sold separately)
1.  Unplug the adapter from the electrical outlet.

2.  Remove the protective film from the tape on the back of the strip light and attach 

the strip to a clean, grease-free surface. The strip light may also be screwed on 
with plastic clips.

3.  Connect the strip lights together with one another.

Note:

 Make sure the strip light is connected in the right way. Otherwise the strip 

light will not work.

Remote control

1.  12 colour tones within the RGB spectrum
2.  [ R ]  Red  light 

[ G ]  Green  light 
[ B ]  Blue  light 
[ W ]  White  light

3.  [   ] Increase light intensity

[   ] Decrease light intensity

4.  [ OFF ] Turn the strip light off

[ ON ] Turn the strip light on

5.  [ FLASH ] Change slowly between all the colours
6.  [ STROBE ] Change quickly between all the colours
7.  [ FADE ] Change between all the colours, the 

colours fade into one another

8.  [ SMOOTH ] Change between all colours with no visible transition

Care and maintenance

•  Unplug the mains lead from the wall socket before cleaning.
•  The product should be cleaned using a dry cloth or vacuum cleaner.

Responsible disposal

This symbol indicates that the product should not be disposed of with 
general household waste. This applies throughout the entire EU. In order 
to prevent any harm to the environment or health hazards caused by 
incorrect waste disposal, the product must be handed in for recycling 
so that the material can be disposed of in a responsible manner. When 
recycling your product, take it to your local collection facility or contact the 
place of purchase. They will ensure that the product is disposed of in an 
environmentally sound manner.

Specifications

Mains adapter

Power supply 

230 V AC, 50/60 Hz

Output 

24 V DC, 1 A, 24 W

Strip light
36-7974  

36-7975

Dimensions 

6000 x 10 mm 

Dimensions 

3000 x 10 mm

Light source 

324 x LED 

Light source 

162 x LED

Remote control

Range 

Max 7 m from straight ahead, 3 m from the sides.

Battery 

1 x CR2025 (included)

Extendable RGBW LED Strip Light

Art. no 

36-7974 

Model  LS9A123-1-01

 

36-7975   LS9A123-2-01

Read the entire instruction manual before use and save it for future reference. We 
apologise for any text and picture errors and any changes of technical data. If you have 
any questions concerning technical problems please contact our Customer Services.

Safety

 

Warning:

•  Neither the product nor its mains adapter may be dismantled or modified in any 

way.

•  Never use the product or the mains adapter if it is in any way damaged or 

malfunctioning. Unplug the product immediately if it is damaged.

•  Do not use the product in environments where explosive or flammable gases are 

stored or used.

•  The product must only be connected to the included mains adapter.
•  Never connect several or other types of devices to the mains adapter.
•  The product must not be installed on a wet or electrically conductive surface.
•  Make sure that the cables are not damaged whilst the product is being installed.
•  Always unplug the mains adapter from the wall socket when the product is not in 

use.

•  Do not carry the product using the mains lead and do not use it for other 

unsuitable purposes.

•  Never let children play with the product.
•  The product may be used by persons with reduced physical, sensory or mental 

capabilities or persons with a lack of experience or knowledge which could 
jeopardise their safety, provided they have been instructed in the safe operation of 
the product and understand the hazards involved.

 

Important

•  The LEDs cannot be replaced. When the LEDs have reached the end of their 

service life, the entire product must be discarded.

•  This product is intended only for private use.

UNITED KINGDOM • CUSTOMER SERVICE

  tel. 020 8247 9300  e-mail [email protected]  internet www.clasohlson.co.uk   

postal Clas Ohlson Ltd, Aquilla House (First floor), 1 Becketts Wharf, Lower Teddington Road, Hampton Wick, Kingston Upon Thames, KT1 4ER

Ver

. 20200611

5

6

3

2

1

4

5

6

7

8

1

2

3

4

Summary of Contents for LS9A123-1-01






Reviews: