E
N
G
LI
S
H
1. Description
• Internal PCI modem, V.92
• Speed up to 56 Kbps
• Supports ITU V.92/V.90 56 K protocol
• Plug and Play
• Supported by Win98SE, ME, XP and Win 2000
2. Mounting the modem
• NB! When a PCI-card is installed, it is
very important that the
computer is turned off
.
• Computer components are very sensitive to static electricity;
preferably use an anti-static bracelet when you mount the PCI-card;
if you don't have such a bracelet, you can do as follows: Drain your
charge by holding the computer chassis shortly before and during
the time you handle the PCI-card.
1. Turn off the computer and all connected units; unplug the
computer’s power cord plug.
2. Open up the computer cabinet so the mother board becomes
accessible.
3. Mount the modem in a free PCI-slot; don’t push too hard when
mounting the card, otherwise you might damage the mother board.
4. Secure the card with a screw or other form of fitting. (When
correctly mounted, the PCI-card shall be pushed down equally far
along the full length of the slot).
5. Assemble the computer cabinet (make certain no cables are jammed).
6. Start the computer and install the device drivers.
NB! Close Antivirus programs and other active programs that are
not needed for the installation.
