8
English
Distortion
• Use the channel selector to change the transmitter’s frequency. Fine tune
the headphone’s reception by pressing
AUTOTUNE
once.
• Low batteries. Recharge the batteries.
• Check that the volume control is correctly set.
Noise interference
If the transmitter’s audio output is too low there will be audible background noise
in the headphones. Raising the volume of the audio source connected to the
transmitter (e.g. your TV) will strengthen the transmitter signal and suppress the noise
distortion in the headphones. You can then lower the volume on the headphones to
get the same volume as before but with much less (barely audible) noise and this will
also help the headphone batteries last longer.
Care and Maintenance
Use a soft damp cloth to clean the product. Never use solvents or strong detergents.
Responsible disposal
This symbol indicates that this product should not be disposed of
with general household waste. This applies throughout the entire EU.
In order to prevent any harm to the environment or health hazards
caused by incorrect waste disposal, the product must be handed in
for recycling so that the material can be disposed of in a responsible
manner. When recycling your product, take it to your local collection
facility or contact the place of purchase. They will ensure that the
product is disposed of in an environmentally sound manner.
Specifications
Transmission frequency 863–865 MHz
Operating voltage
Headphones
2 × AAA/HR03 (rechargeable, included)
Transmitter
8 V DC, 200 mA via the adaptor
230 V AC, 50 Hz (included)
Frequency response
40 Hz – 12 kHz
Distortion
1.5 %
Signal-to-noise ratio
> 50 dB
Channel separation
30 dB
Range
Up to 100 metres