EN
G
LI
S
H
4
Operating instructions
Note:
Never use the vacuum without the filter in place.
On/off button
1. Make sure the power switch is in the
OFF
position.
2. Insert the power cable into the 12 V
socket of the vehicle.
1. Fold out the extension nozzle (1)
and push it into the vacuum until it
sits securely in place (the vacuum
may also be used without extending
the extension nozzle).
3. Turn the vacuum on/off by sliding
the power switch to the desired
position.
2. Attach the brush nozzle if needed.
Note:
The brush nozzle can only be
attached to the extension nozzle.
Dry vacuuming
3. Remove the brush nozzle once you have finished vacuuming.