Clas Ohlson 38-9985, Instruction Manual

Page: 2 / 68

2
English
3D Printer Tina 2
Art. no 38-9985 Model Tina2
Please read the entire instruction manual before using the product and then save
it for future reference. We reserve the right for any errors in text or images and any
necessary changes made to technical data.In the event of technical problems or other
queries, please contact our Customer Services (see address details on the back).
Safety
Follow the safety guidelines below. Ensure that you have read and understood all
safety instructions and warnings which can appear in any documents which are
included with this product and its accessories.
• Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
• Never use the product in areas where explosive gases or liquids are stored.
• Never use the product when you are tired, sick, under the influence of alcohol
or medicine.
• Always unplug the mains lead when moving the product for service or
maintenance.
• If extension leads are used, ensure that they are designed for the purpose for
which they are intended to be used.
• Only use earthed power points with a voltage rating which correspond to the
specifications listed on the product’s rating plate.
• Do not place the mains lead where it can be crushed or damaged by sharp edges.
• Never use the product if it or its mains lead is damaged in any way.
• If the mains lead is damaged it should only be replaced by a qualified electrician.
• Never try to open the housing or try to repair the product in any way. The product
contains no user-serviceable parts.
• Never attempt to tamper with or modify the product in any way.
• Do not place the product so that it risks being exposed to moisture or affected by
water or any other types of liquids. Avoid exposing the product to direct sunlight,
dust or extremely cold or hot environments. The product is designed to function
optimally in temperatures of 15–25 °C (59–77 °F) and at a humidity level of 20–50 %.
• Pull up any long hair and ensure that no loose hanging clothing or jewellery risks
coming into contact with any of the product’s moving parts or hot components.
• Place the product on a stable, even surface and at a safe distance from all
flammable materials.