Clas Ohlson 36-8130, Instruction Manual

Page: 6 / 38

6
English
Selecting the power (high/medium/low)
The humidifier is set to operate at the highest humidification level when it is switched on.
The humidifier can then be set to one of the following power settings:
High Medium Low
Warm mist:
- High = approx. 400 ml/h
- Medium = approx. 350 ml/h
- Low = approx. 300 ml/h
Cold mist:
- High = approx. 300 ml/h
- Medium = approx. 220 ml/h
- Low = approx. 200 ml/h
Selecting cold or warm mist
a) When switched on the humidifier starts in cold mist mode.
b) Pressing
once will change to warm mist mode and the heating element will turn on.
“HYBRID” is shown on the display.
c) Pressing once again will change back to cold mist mode and turn the heating element off.
Selecting the humidity level
a) The humidifier starts off in CO mode (continuous operation).
b) Press the required number of times to set the desired humidity level for the room:
40% to 75% with an increase of 5% for every press and then back to CO (continuous operation).
c) Once the desired humidity setting is reached the humidifier will enter standby mode. The humidifier will
automatically restart whenever the humidity level drops below this setting.
d) CO mode stands for continuous operation, which means that the humidifier will run continuously until
the water tank runs dry regardless of the ambient humidity level. A full water tank will last for about 11
hours in continuous operation mode.
Setting the timer (1–12 hours)
a) Press repeatedly to set the number of hours that you wish the humidifier to operate for: 1h (1 hour),
2h , 3h , 4h , 5h , 6h , 7h , 8h , 9h , 10h , 11h , 12h and 0h (0h = no timer). The timer begins to countdown
as soon as it has been set. Pressing the timer button again during the countdown will add additional
hours (1 hour for every press).
Sleep mode
a) Pressing once will enter the humidifier into sleep mode. The display will switch off but none of the
settings will be affected.
Automatic shut-off when the water tank is empty
a) When the water tank has emptied, the humidifier will beep 3 times and “NO!” will appear on the
display.
b) Unplug the humidifier from the wall socket and fill the water tank. Never fill the water tank with water
that is hotter than 40 °C.
c) When the water tank contains water, the humidifier can be switched on again.