9
E
n
g
li
s
h
4.3 The function buttons can be used in the following modes
Function selector
setting
Function buttons
[ Select ]
[ Rel Δ ]
[ HOLD ]
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
5. Operation
To give as accurate a reading as possible, always place the test object in the centre
of the clamp when measuring.
If the display does not alter during measurement, check if the Hold function is
activated.
appears on the display when Hold is activated.
5.1 Voltage measurement (V DC) or (V AC)
Warning:
In order to avoid personal injury or damage to the meter, do not measure voltages
over 600 V DC or 600 V AC RMS.
1. Connect the black test lead to
the COM input terminal and
the red test lead to the upper
input terminal.
2. Set the function selector to
.
3. Press [ Select ] and choose either
or
.
4. Connect the test leads to
the circuit. The measuring range
is selected automatically (if
shows on the display).
5. Press [ Rel Δ ] if you wish to
change the measuring range
manually.
6. Read the value; press [ HOLD ]
if you have difficulty seeing
the display or if you wish to save
the reading.
7. Press [ HOLD ] again to exit
the measurement mode.
8. Disconnect the test leads.
