7
English
Trimming
If the aircraft drifts over in any direction you can use trim buttons (8+9) to regain
stability again.
Sub-body flight
The aircraft may also be flown using
the sub-body alone without the larger
body that comes attached to it at
purchase.
High/low speed
The aircraft has 2 speeds:
MODE 1 = Low
MODE 2 = High
Switch between modes by pressing
the [ MODE ] button until the desired
mode is set.
Loop 360º
1. Press [ 360º ] to perform an automatic
looping manoeuvre.
2. Press the loop mode button (16).
A beep will be heard which indicates
that the aircraft is in loop mode.
3. Push the throttle (15) in a desired
direction and the aircraft will perform
a loop in that same direction.
Note:
This manoeuvre requires ample
room to execute.
1. Lift the larger exterior body upwards
from the sub-body.
