6
E
n
g
li
s
h
7
Setting the time
The first time the mains lead is connected, “0:00” will flash on the display.
The display will stop flashing as soon as you begin setting the time.
1. Press and hold in TIME whilst simultaneously pressing repeatedly on
HOUR to set the hours.
2. Press and hold in TIME whilst simultaneously pressing repeatedly on
MINUTE to set the minutes.
Listening to music (radio, iPod or external
audio sources via the aux-in)
1. Set the function switch (3) to the
ON
position.
2. Select an audio source using the iPod/AUX/RADIO switch (5).
3. Adjust the volume using VOLUME (1).
Listening to the radio
1. Set the function switch (3) to the
ON
position.
2. Set the
iPod/AUX/RADIO
switch (5) to “RADIO”.
3. Set the radio band selector to the desired frequency range; AM, FM
or FM stereo.
4. Tune into the desired station using the tuning knob and adjust
the volume using the volume control.
5. Set the function switch (3) to
OFF
to turn the radio off.
FM:
Fully unravel the wire aerial and position it until you receive the
best reception.
AM:
The stereo is equipped with a built-in aerial. Therefore, the wire aerial
is not necessary. Direct the aerial by positioning the entire stereo.
Listening to an iPod
If you have an iPod, you can connect it to the clock radio to listen to your
iPod music. Your iPod is charged all the time it is connected to the dock.
This device supports the following iPod models:
iPod classic
iPod touch (1st and 2nd generation)
iPod nano (1st to 4th generation)
iPod (5th generation)