12
E
n
g
li
s
h
Enlarging or reducing picture size
• Press [ZOOM] on the remote the desired amount of times to enlarge the image
(max. 4 x zoom). The display will show the current zoom setting.
• Use the direction buttons to position the enlarged area.
Slow-motion
• Hold in [SLOW] on the remote control to play the film in slow-motion (up to
16 times slower than normal).
Setting the brightness and colour
The display’s brightness and colour can be set at anytime during playback.
• Press [BRI/COL] on the remote control to set the display screen properties. Switch
from light intensity (BRI) to colour (COL) by pressing [BRI/COL]. Adjust the setting
value using the right and left direction buttons.
Displaying playback information
During playback, press the [DISPLAY] button repeatedly in order to view playback
information. The information will be shown in the upper part of the screen.
Searching for a specific chapter
Press [SEARCH] to search for a specific chapter. You will be prompted to enter a title,
chapter and time. Enter the number of the desired chapter using the numerical but-
tons and then press [OK] to begin playback.
Programmed playback
1. Press [PROGRAM] to enter the programming mode.
2. Programme the titles and chapters using the numerical buttons. Navigate through
the programming box using the direction buttons.
N.B.
If you wish to programme
chapter 2 for example, enter “02”.
3. To start playing the programmed section, go to “Start” in the programming menu
and press [OK].
4. To change your programme, use the direction buttons and highlight the entry you
wish to change. Enter the new title and chapter using the numerical buttons.
N.B.
The programme can’t be changed once playback has begun.
. To delete the programme list during playback, press the [PROGRAM] button.
“Stop” will now be highlighted in the programming menu. Press [OK] to delete all
entries on the programme list. “Exit” will now be highlighted. Press [OK] to exit the
programming menu.
