4. Check the computer’s settings
Check that the computer is set to automatically receive
an IP address and that the computer has received the
correct IP address from the router.
-
Click on
Start
and choose
Run…
.
-
Type
Cmd
and then click
OK
.
-
Type
ipconfig
and check that the computer receives
the correct IP address (in this case 192.168.1.4) and
gateway (192.168.1.254).
If the computer has not received the correct IP
address, see the instructions in the quick guide.
5. Configuration of the router
-
Start the web browser. In the address field enter the
router’s IP address (same as gateway).
-
When the login page appears enter your username and
password.
Username:
Admin
Password:
admin
6. The setup guide (Setup Wizard)
-
Click on
Setup wizard
and follow the instructions. The
suggested settings usually do not have to be changed.
-
On the page
Internet Connection Type
choose your
broadband distributor’s connection type (see step 1).
-
Click on
Next.
If you have received connection
information from your broadband distributor enter it
here, otherwise click
Finish
.
7. Displaying the connection status
-
When the configuration is completed, click
Status
to
display the connection’s status.
-
If an IP address is displayed in the field,
WAN IP-
address
the connection is correctly configured. If
instead the text
WAN IP-address: Unavailable
or
0.0.0.0
is displayed the connection has not yet received
an IP address from the distributor. In that case go to
step 8.
8. The router does not receive an IP address
-
If the connection after configuration has not received
an IP address from the distributor, turn off the modem
and let it remain off for about 30 minutes.
-
Then turn the modem on again and check the
connections status according to step 7.
