6
English
7
Troubleshooting guide
The clipper does not start.
• The battery is discharged. Charge the battery by connecting
it directly, via the clipper or via the charger station.
• If the clipper is used with the mains lead, make sure that it is
securely plugged in and that the wall socket is live.
• Battery is flat, change it.
The battery does not charge.
• Make sure the mains lead is undamaged and is securely
connected to both the wall and clipper socket.
The clipper motor runs slowly.
• Clean and lubricate the cutting head, refer to the
Care and
maintenance
section above.
Unsatisfactory cutting results.
• The cutting head blades are blunt, change cutting head.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local council.
Specifications
Mains adaptor
In 100–240 V AC, 50/60 Hz
Out 4.5 V, 1000 mA
Battery
2 × 1.2 V/1000 mA
Operating temperature
−10 to +40 ºC
Trim length
0.5–30 mm
Charging time
9 hours
Operating time
50 min
Comes with 5 guide combs, a cleaning brush, scissors and lubricating oil.
