background image

 

Page 21 

WARRANTY 

1.

 

TIME AND SCOPE OF WARRANTY: 

 

1.1.

 

Clary  Corporation  hereby  warrants  parts  shipped  under  this  Agreement  to  be  free  from 
defective workmanship for a period of 2 years following date of shipment.  Accidental damage, 
misuse or normal wear and tear shall not be construed as a defect. 

 

1.2.

 

The date of shipment as used herein will be the date on the Bill of Lading.  If no Bill of Lading 
is issued the date of shipment shall be shown on seller's shipping document. 

 

1.3.

 

No provision of this warranty shall cover equipment that has been altered or modified from the 
original specifications to which it was manufactured unless authorized in writing. 

 

1.4.

 

No  provision  of  this  warranty  shall  cover  batteries.    However,  battery  manufacturer's 
warranties will be passed through to the customer whenever applicable. 

 

2.

 

LIMITS OF "IN WARRANTY" SERVICE LIABILITY: 

 

2.1.

 

Clary  is  obligated  during  the  in-warranty  period  to  provide  service  and/or  adjustments  to 
equipment returned to the factory at the expense of buyer (the term "factory" as used here-in 
shall also include any field service centers which may be established by Clary) and to repair or 
replace  any  part(s)  thereof  which  in  the  opinion  of  authorized  Clary  personnel  are  found  to 
have been defective. 

 

2.2.

 

Equipment requiring in-warranty services must be returned to the factory with all transportation 
charges  prepaid,  clearly  tagged,  and  stating  the  nature  of  the  trouble  experienced,  and  the 
disposition  of  the  equipment  after  repair.    The  equipment  will  be  returned  collect  by  Clary  to 
the location specified via the best, least expensive carrier available or via customer's shipping 
instructions. 

 

2.3.

 

The  nature  of  certain  equipment  installations  may  be  such  that  it  would  be  impractical  or 
technically  infeasible  to  remove  the  Clary  portion  of  the  equipment  from  the  customer's 
premises  to  the  Clary  factory.    In  such  cases,  and  at  the  request  of  the  buyer,  Clary  will 
perform such service as can be satisfactorily rendered at buyer's location.  The buyer will be 
charged  only  for  travel  expenses  incidental  to  the  service  call,  provided  that  the  warranty  is 
applicable. 

 

2.4.

 

During  the  in-warranty  period,  no  service  charges  shall  be  payable  by  the  buyer  for  service 
performed  other  than  for  service  necessitated  by  accident,  misuse,  theft,  abnormal  line  or 
source  voltage  fluctuations,  abnormal  conditions  of  operation,  damage  by  the  elements  or 
damage  resulting  from  adjustments,  repairs,  modifications  made  by  other  than  Clary 
Authorized personnel, or the buyer's failure to reasonably maintain the equipment. 

 

2.5.

 

THE  FOREGOING  WARRANTY  IS  EXCLUSIVE  AND  IS  GIVEN  AND  ACCEPTED  IN  LIEU 
OF  ANY  AND  ALL  OTHER  WARRANTIES,  EXPRESSED  OR  IMPLIED,  INCLUDING 
WITHOUT  LIMITATION  THE  IMPLIED  WARRANTIES  OF  MERCHANTABILITY  AND 
FITNESS  FOR  A  PARTICULAR  PURPOSE.    THE  REMEDIES  OF  BUYER  SHALL  BE 
LIMITED TO THOSE PROVIDED HEREIN.  IN NO EVENT WILL SELLER BE LIABLE FOR 
COLLATERAL  OR  CONSEQUENTIAL  DAMAGES.   

No  person  is  authorized  to  assume  in 

behalf of Clary any obligation or liability in connection with the sale, warranty or service policy 
of  any  products  manufactured  and/or  marketed  by  Clary  Corporation  beyond  the  warranty 
description on the face hereof. 

 

3.

 

Clary  Corporation  reserves  the  right  to  make  changes,  additions,  and/or  improvements  in  its 
products without incurring any obligation to install them on its products previously sold. 

 

 

 

Summary of Contents for SP1250DLE






















Reviews: