Claro CFCLSU2LWH, Installation Manual

Page: 5 / 14

INSTALLATION AND ASSEMBLY
CAUTION: Before installing the fan make sure you have turned OFF the electricity supply.
SELECTING A LOCATION:
SELECTING A LOCATION:
1. Choose a location for mounting the fan where the blades will have at least 2.1 metres of clearance
from the floor.
2. Make sure that the installation site will not allow the rotating fan blades to come into contact with
any object and that there is enough space from the blade tip to the wall or ceiling. Please note that
insufficient clearance distances might cause wobbling and the bigger this clearance is the better the
airflow from your fan will be.
3. DO NOT install CFCLSU2WH and CFCLSU2LWH outdoors. Installing the fan in a position where it
could be exposed to water, moisture or external elements is dangerous.
4. CFCLSU2WHABS and CFCLSU2LWHABS can be installed in a position where it is covered or
enclosed al fresco areas and there is a minimum clearance of 1.50 m from the blade tip to all edges
of the roof or positions where could be exposed to water, moisture or other dangerous external
elements.
5. Secure the hanging bracket to the ceiling joist or suitable structure that is capable of carrying a
load of at least 45Kg, with the two long fixing screws provided. Ensure that at least 30mm of the
screw is threaded into the support.
The fixing screws included are designed for use when ceiling fan is secured onto timber joists. For all
other surfaces, additional and suitable fixing screws for that surface will need to be purchased.
4
ELECTRICAL CONNECTIONS
Ensure the power is off when installing this fan.