10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
DRYING FUNCTION
If the dehumidifier has been used in a high humidity environment for a long
period of time, or you do not intend to used the dehumidifier for a few weeks,
you must run the drying cycle to remove water/moisture from the unit. This will
prevent a build up of mildew which will affect the efficiency and life of the
unit.
HOW TO START THE DRYING FUNCTION
1. Press and hold the mode button for 3 seconds until DRYING FUNCTION
is selected.
• The dehumidifier will start its drying cycle.
HOW TO STOP THE DRYING MODE
1. Press and hold the Mode button for 3 seconds to cancel the drying
function.
• The unit will be revert to the mode that was running before the DRYING
FUNCTION was selected.
KEYPAD LOCK
1. Press and hold the lock button for 3 seconds to
activate the keypad lock.
• The small LED above the lock button will
illuminate when the keypad lock is active.
2. Repeat step 1 to deactivate the keypad lock
function.
Summary of Contents for YDE20
Page 16: ......
