8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATING INSTRUCTIONS
HEATER START UP
1. Make sure power switch is in the
OFF position.
2. Turn thermostat to lowest setting.
3. Plug the heater into the mains
power supply.
4. Turn the thermostat to highest
setting.
5. Start heater by setting the power
switch to the ON position.
• The switch illuminates in the ON position.
6. Adjust thermostat to desired setting.
NOTE:
Heater will cycle on/off to maintain an even temperature.
HEATER SHUT DOWN
1. Set the power switch to the OFF
position.
2. For extended shutdown, unplug
the heater from the mains supply.
BEFORE STORAGE
• Clean the heater as described
in the MAINTENANCE section.
• The manufacturer
recommends completely filling
the tank with fuel for extended storage to minimize condensation
inside the tank.
