4.
Remove the outer flange followed by the blade.
5.
Replace in reverse order, ensuring the tips of the blade point downwards
at the front.
3. Renewing Motor Brushes
Eventually, the motors’ carbon
brushes will need replacing. This
task may be carried out quickly and
easily as follows.
1.
Remove the three cross head
screws,securing the motors’
end cover, andpull off the
cover.
2.
With a pair of long nose pliers,
pull out each brush holder, as
shown in fig. 14, and disconnect
the push-on connector.
3.
Insert the new brush with spring
Fig. 15
Fig. 14
into the holder, and reassemble
in reverse order, ensuring that each brush
holder is gently pushed into its housing with
the shoulder inwards (see fig. 15)
4.
It is important to ensure that the brush holders
are fully home in their housings, and the push-
on connections are secure before replacing
the end cover.
15
Summary of Contents for Woodworker CMS254
Page 1: ...OPERATING MAINTENANCE INSTRUCTIONS CMS254 COMPOUND MITRE SAW 0604...
Page 8: ...PRINCIPAL PARTS OF THE SAW Fig 1 82...
Page 18: ...PARTS DIAGRAM 18...
Page 21: ...23...
