background image

11.

REMOVE ADJUSTING KEYS AND WRENCHES.

 Form the habit of checking

to see that keys and adjusting wrenches are removed from the
machine before switching on.

12. Do not operate machine while under the influence of 

DRUGS,

ALCOHOL OR ANY MEDICATION.

13.

USE ONLY RECOMMENDED ACCESSORIES.

 The use of improper

accessories could be hazardous.

14.

NEVER LEAVE MACHINE RUNNING UNATTENDED

. Turn power OFF. Do

not leave machine until it comes to a complete stop.

15.

ALWAYS DISCONNECT FROM THE MAINS SUPPLY

 when adjusting,

changing parts, or working on machine.

16.

AVOID DANGEROUS ENVIRONMENT.

 Don’t use power machines in

damp or wet locations or expose them to rain. Keep your work area
well illuminated. DO NOT USE in explosive atmosphere (around paint,
flammable liquids etc.).

17.

KEEP CHILDREN AWAY

. All visitors should be kept a safe distance from

the work area, especially whilst operating the unit.

19.

MAINTAIN MACHINE IN TOP CONDITION.

 Keep it clean for the best

and safest performance. Follow maintenance instructions.

21.

DON’T OVERREACH

. Keep your proper footing and balance at all times.

For best footing, wear rubber soled footwear. Keep floor clear of oil,
scrap wood, etc.

22.

WEAR PROPER APPAREL

. Loose clothing or jewellery may get caught

in moving parts. Wear protective hair covering to contain long hair.

23.

MAKE WORKSHOP CHILDPROOF.

 Cover the machine adequately when

not in use, to prevent children from damaging themselves by
tampering with it.

24.

NEVER STAND ON THE MACHINE.

 Serious injury could occur if the

machine is tipped or if a cutting tool is accidentally contacted. Do
not  store materials above or near a machine, such that it is necessary
to stand on the machine to reach them.

25.

HANDLE WITH EXTREME CARE

 whenever transporting or installing

machinery. ALWAYS have assistance with heavy or awkward loads.

26.

AVOID ACCIDENTAL STARTING.

 Ensure the switch is OFF before plugging

in to mains.

27.

ALWAYS CONCENTRATE ON THE JOB IN HAND,

 no matter how trivial it

may seem. Accidents are frequently caused by carelessness due to
familiarity.

5

Summary of Contents for Woodworker CDS300













Reviews: