7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
UNPACKING AND ASSEMBLY
Unpack your pressure washer and check to ensure the following items are
present.
Contact your Clarke dealer immediately if any parts are missing or damaged.
CONNECT WATER SOURCE
Always follow the regulations of you local water supplier. The pressure washer
must never be connected to the drinking water supply without using a system
separator (also known as a backflow preventer) available from most
hardware stores.
NOTE:
Water that has flowed through a system separator is considered non-
drinkable.
1. Connect a water supply hose (not
supplied) to the water inlet.
NOTE:
Use a good quality fibre-
reinforced water hose with a
standard coupling.
• 1 x Petrol Pressure Washer
• 1 x Hose
• 1 x Gun Assembly
• 1 x Tap Adaptor
• 1 x Hose bracket
• 1 x Lance Assembly
• 1 x Nozzle Cleaning Pin
• 1 x Spark Plug Box Spanner
• 1 x Tommy Bar
Summary of Contents for TIGER1700
Page 24: ......
