7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5. Slide the right arm into the base
frame as shown. Line up the holes
and secure with a 130 mm bolt,
washers and nut, securing the side
bracket as you do so.
6. Repeat the procedure for the left
arm.
7. Insert the locking pins and secure
the pins using the R-clips attached
to the small chains.
8. Attach the main support post
onto the base frame assembly
using two 110 mm long bolts with
washers and nuts. Leave the nuts
& bolts loose until step 9.
9. Add the two side braces, bolting
them between the base frame
and the main support post. Leave
the bolts loose until they are
aligned with the hole in the main
support post. Once aligned, fully
tighten the side braces to the
base and the support post.
WARNING: IT IS ESSENTIAL THAT THE LOCKING PINS ARE IN PLACE BEFORE
ATTEMPTING ANY LIFTING TASKS. FAILURE TO INSTALL THESE WOULD
RESULT IN THE CRANE TIPPING FORWARD WHEN SUBJECTED TO ANY
LOAD.
Summary of Contents for Strong-Arm 7611025
Page 16: ......
