Thank you for purchasing this CLARKE Water Pump, which is particularly suitable
for the filtration of small to medium size swimming pools and ponds and for pumping
clean water or water containing small solids in suspension.
To help ensure long, trouble free performance and the protection afforded by
the warranty, please carefully follow all the instructions and recommendations
given in this booklet.
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered
with in any way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase. No product can be
returned to us without prior permission. This guarantee does not effect your
statutory rights.
SAFETY PRECAUTIONS
1.
Ensure the pump is installed in a horizontal position with the outlet facing
vertically upwards, and that it is firmly anchored via its fixing screws.
2.
Ensure there is an adequate air flow around the pump. DO NOT mount it in an
enclosed atmosphere.
3.
Ensure all water pipes - supply or discharge, are adequately supported where
necessary, so as not to put a strain on the pump connections.
4.
DO NOT allow the pump to run dry, as this will cause serious damage to the
pump seals.
5.
Ensure the inlet to the pump is completely unrestricted.
6.
Ensure the pump is protected from the elements, neither the motor nor the
electrical terminal box is intended to be waterproof.
7.
Ensure that all pipes are protected against damage where necessary, and
that they are suitably lagged to avoid the possibility of freezing during cold
weather.
8.
NEVER switch the pump ON when the pool is in use. ALWAYS disconnect the
pump from the electrical supply.
9
.
THIS PUMP MUST BE CONNECTED TO THE ELECTRICAL SUPPLY VIA A
RESIDUAL CURRENT DEVICE (RCD)
2