8
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
MAINTENANCE
The only maintenance required is a regular inspection to ensure that debris is
not blocking the passage of water through the pump.
Clean the filter basket periodically
after closing any inlet and delivery
valves and removing the filter cover,
using the wrench provided. Lift out
the filter basket and clean it in water,
check the cover O-ring is in good
condition before reassembly.
If you suspect the pump is blocked
by silt, leaf debris etc, disconnect it
from the mains supply and backflush
to clear any blockage though the
drain plug. You will need to disconnect the outlet hose and lift out the non-
return valve to do this.
Always keep the pump in a clean condition, checking regularly for loose
bolts or a damaged power cable etc.
AFTER USE
After use, and if the pump will not be used over the winter period, or
whenever there is danger of freezing, always drain the pump body. If the
pump has been used with contaminated or salty water, it should be
thoroughly flushed with clean water following use, both inside and out. It
should then be drained before replacing
the drain plug, and covered over, if
not already installed in a clean, dry environment sheltered from the weather.
Remember to re-prime the pump when returning to service.
In the event that dismantling and overhaul of the pump is necessary,
contact your CLARKE International Service Department on 020-8988-7400.
ACCESSORIES
A wide range of accessories is available, including Filters, Hoses and clips,
Couplings and 90
°
Hose Adaptors, etc. Contact your Clarke dealer for further
information. The use of parts other than genuine Clarke replacement parts
may result in possible safety hazards or decreased machine performance,
and will invalidate your warranty.
ENVIRONMENTAL PROTECTION
Do not dispose of this product with general household waste. It must be
disposed of according to the laws governing Waste Electrical and
Electronic Equipment at a recognised disposal facility. Any redundant
accessories and packaging should be sorted and taken to a recycling
centre to be disposed of appropriately.
Fig 4
O-ring
Filter
Basket
Non-
return
valve
