12
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
STARTING YOUR POWER WASHER
Prior to starting, refer to your engine manual for proper starting procedures for
your engine type.
1. Make sure the engine has sufficient fuel. See page 10.
2. Check the engine oil level. See page 9.
3. Turn water supply on.
4. Set the engine switch to ‘ON’.
5. Set the fuel valve lever to the ‘on’
position.
6. If you are starting the power
washer ‘cold’ set the choke lever
to the CHOKE position (left). If the
power washer is warm skip this
step.
WARNING: FAILURE TO TURN ON THE WATER COULD CAUSE DAMAGE TO
THE PUMP.
Summary of Contents for Power Wash PLS195A
Page 28: ......
