-4 - FORM NO. 70193B
Clarke
®
Operator's Manual - MP-1800 Marble Polisher
HOW TO PREPARE THE MACHINE FOR OPERATION
WARNING!
Always remove the electrical plug from the electrical outlet before
installing or changing the pad or brush.
How To Install The Brush Or Pad Driver
To install the brush or pad driver, follow this procedure:
1. Put the handle in the vertical position.
2. To lock the handle, push the locking lever down. See
fi
gure 1.
3. Tilt the machine backward until the handle is on the
fl
oor. See
fi
gure 2.
4. Put one foot on each side of the machine. See
fi
gure 2.
5. Align the lugs (1) on the locking plate into the pad driver adapter
openings (2). See
fi
gure 3.
6. To lock the brush or pad into position, turn the brush or pad
driver as indicated in
fi
gure 2 (A).
7. To unlock and remove the brush, turn the brush or pad as
indicated in
fi
gure 2 (B).
8. Lift the machine to the vertical position.
NOTE: To prevent damage to the brush or pad driver, remove the
accessory while not in use. Keep the brush in a cool, dry place.
How To Adjust The Handle
To adjust the handle, follow this procedure:
1. The locking lever is on the lower part of the handle tube. Use
your foot to lift the lever.
2. Lower the handle to the best operating position.
NOTE: For the best operating position, keep your back straight,
bend only your arms.
3. Using your foot, push the locking lever down.
4. Hold the handle against your body for the best control.
Figure 1
Figure 2
Figure 3
1
2
A
B
1. The lugs.
2. The drive adapter openings.
EN
https://harrissupplyind.com - To Order Parts Call 608-268-8080
