16
Fig.1
ASSEMBLY
Remove contents from carton and check all components as follows:
The side panel is hinged at its rear edge: Open by pulling the securing catch
sideways, lay out all components contained within, and check to ensure that they
are all correct according to the list below.
A
-
2 Wheels
B
-
1 Axle
C
-
2 Wheel retaining washers
D
-
2 Wheels
E
-
1 Handle
G
-
2 Fixing screws
LOOSE ITEMS
1x Mask with fixing screws & washers
1x Mask handle
2x Handle retaining screws
1x Transparent glass
1x Dark glass
1x 0.6mm welding tip
1x 0.8mm welding tip
1x Gas regulator
1x welding torch and lead (Torch and hose assembly is factory fitted )
SHOULD ANY PART BE MISSING OR DAMAGED, CONTACT YOUR LOCAL DEALER FOR
REPLACEMENT.
A. Handle and Wheels
1.
Slot the axle (B) through the holes at the rear of the machine and slide a
wheel (A) on to each end followed by the retaining washers.
2.
Screw the two casters (D) to the machine.
3.
Attach the handle to the top of the machine, line upthe holes with those in
the casing, and secure using the screws provided.
