Clarke Metalworker CMD10, Operating And Maintenance Instructions Manual

Page: 6 / 10

-5- -14-
14. ALWAYS wear proper apparel. loose clothing or jewellery may
get caught in moving parts. wear protective hair covering to
contain long hair.
15. ALWAYS use recommended accessories. the use of improper
accessories could be hazardous.
16. ALWAYS remove plug from electrical outlet when adjusting,
changing parts, or working on the machine.
17. NEVER operate machine while under the influence of drugs, alcohol or any medication.
18. NEVER leave machine running unattended. turn power off.
Do not leave the machine until it comes to a complete stop.
19. NEVER force the machine. it will do a better and safer job at
the rate for which it was designed.
20. NEVER use power tools in damp or wet locations or expose
them to rain. Keep your work area well illuminated. do not
use in explosive atmosphere (around paint, flammable liquids
etc.). Avoid dangerous environment.
Additional Precautions For Power Tools
1. ALWAYS wear ear protectors/defenders as the noise level of this machine can exceed
70dB (A).
2. ALWAYS use the appropriate cutter for the material being cut.
3. DO NOT use the machine if the electric cable, plug or motor is in poor condition.
4. DO NOT allow the ventilation slots in the machine to become blocked.
5. DO NOT touch the cutter immediately after use, allow time for it to cool.
6. Replacement cutters are available from your CLARKE dealer.
7. Ensure the cutter is fully tightened before use.
8. Switch the machine OFF immediately the task is completed.
9. NEVER leave chuck keys in situ, always remove and store safely when finished
tightenining or loosening the chuck.
10. NEVER Change from high to low speed and vice versa whilst the machine is still
running, always ensure the machine has come to a complete stop before doing so.
11. NEVER change from forward to reverse and vice versa whilst the machine is still
running, always ensure the machine has come to a full stop before doing so.
Additionally, please keep these instructions in a safe place for future reference.
Item Part No Description Qty
Parts List
1 SG10001 Screw M4 x 12 2
2 SG10002 Protect Cover for Motor 1
3 SG10003 Screw M6 x 12 3
4 SG10004 Spring Washer 6 3
5 SG10005 Washer 6 3
6 SG10006 Motor 1
7 SG10007 Round Key 3 x 16 1
8 SG10008 Circlip 2
10 SG10010 Motor Gear 1
11 SG10011 Safety Cover 1
12 SG10012 Screw M4 x 6 1
13 SG10013 Screw M4 x 8 4
14 SG10014 Washer 4 4
15 SG10015 Up Cover 1
16 SG10016 Sleeve Support Table 1
17 SG10017 Screw M6 x 5 1
18 SG10018 Compression Spring 1
19 SG10019 Steel ball 5 1
20 SG10020 Gear Box 1
21 SG10021 Spindle Sleeve 1
22 SG10022 Screw M6 x 14 2
23 SG10023 Bearing 61905-2Z 2
24 SG10024 Spindle Box 1
25 SG10025 Circlip 2
26 SG10026 Spring Seat Ring 1
27 SG10027 Compression Ring 1
28 SG10028 Round Nut Stop Gasket 1
29 SG10029 Round Nut M24 x 1.5 1
30 SG10030 Spindle Gear 1
31 SG10031 Spacer 1
32 SG10032 Spindle Gear 1
33 SG10033 Circlip 1
34 SG10034 Powder Bearing 2
35 SG10035 Gear 1
36 SG10036 Circlip 1
37 SG10037 Change Gear 1
38 SG10038 Shift Shaft 1
39 SG10039 Key 4 x 8 1
40 SG10040 Key 4 x 12 1
41 SG10041 Change Gear 1
42 SG10042 Dila Fork 1
43 SG10043 Flange Lining 2
44 SG10044 Circlip 1
45 SG10045 Spacer 1
46 SG10046 High/Low Speed Knob 1
47 SG10047 Spring Pin 2 x 12 1
48 SG10048 Wedge 1
49 SG10049 Screw 4
50 SG10050 Nut M5 4