6
18. DO NOT STAND ON THE MACHINE. Serious injury could occur if the machine is
tipped over. Do not store materials above or near the machine such that it is
necessary to stand on the machine to get to them.
19. NEVER operate a machine when under the influence of alcohol, drugs or
medication.
20. ALWAYS ENSURE THAT ADEQUATE LIGHTING is available. A minimum intensity of
300 lux should be provided. Ensure that lighting is placed so that you will not be
working in your own shadow.
ADDITIONAL SAFETY RULES FOR METAL LATHES
WARNING:
THIS MACHINE MUST NOT BE MODIFIED OR USED FOR ANY PURPOSE OTHER THAN
THAT FOR WHICH IT IS DESIGNED.
1.
IMPORTANT
: You should not operate this machine unless you are thoroughly
familiar with metal turning lathes and turning techniques. If there is any doubt
whatsoever, you should consult a qualified person.
2.
Do not operate the machine until it is completely assembled, and this entire
manual, has been read and understood.
3.
Ensure the proper electrical regulations are followed, and that the machine is
properly earthed.
4.
Before operating this machine:
a. Ensure all chuck keys, spanners and wrenches are removed from the
machine.
b. Examine the setup carefully, ensuring that nothing could possibly interfere
with the rotating workpiece.
c. Ensure the tool post is secure and the cutting tool is adjusted to the correct
height.
d. Ensure your clothing is properly adjusted.
e. Ensure the workpiece is properly secured.
5.
Make all adjustments with the power OFF.
6.
ALWAYS cut at correct speed for the size and type of material being worked.
(Refer to a suitable Turning Manual for cutting speeds)
7.
NEVER leave the lathe unattended whilst it is running.
8.
When you have finished with machine, always remove and store the cutting
tools.
9.
If coolant is used,
On no account
must it be allowed to enter the electrical
system.
Summary of Contents for Metalworker CL250M
Page 19: ...SPARE PARTS DIAGRAM 19...
