5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
• The YELLOW AND GREEN wire must be connected to the terminal which
is marked E
or coloured green.
The HSE301 & 361
must be connected to a protected 110V supply through a
suitably approved connector. On no account must a 230V, 13amp plug be
used.
NOTE:
If a portable 110V transformer is used, make sure it has a rated
capacity sufficient to take the load of the pump.
In the event that the pump is hard-wired into the electrical system, it must be
carried out in accordance with IEE regulations.
FUSE RATING
The fuse in the plug for this pump must be rated according to the Technical
Specification.
If this product is fitted with a plug which is moulded onto the electrical cable
(i.e. non-rewirable) please note:
1. The plug must be thrown away if it is cut from the cable. There is a danger
of electric shock if it is subsequently inserted into a socket outlet.
2. Never use the plug without the fuse cover fitted.
3. Replacement fuse covers can be obtained from your local dealer or most
electrical outlets.
4. The fuse in the plug must be replaced with one of the same rating and this
replacement must be ASTA approved to BS1362.
IMPORTANT: If in doubt, consult a qualified electrician.
Summary of Contents for HSE RANGE
Page 16: ......
