EN
ENGLISH
Clarke
®
Operator's Manual (EN) - FUSION 20 / 20T - 13 -
MAINTENANCE
These Maintenance Procedures Must Be Done
Every Week:
WARNING: Maintenance and repairs must be
done by authorized personnel
only. Keep all fasteners tight.
CAUTION: To prevent damage to the ma-
chine, and discharge across the
tops of the batteries, do not fill the
batteries above the bottom of the
tube in each cell. Wipe any acid
from the machine or the tips of
the batteries. Do not add acid to
battery after installation.
WARNING: Always wear eye protection and
protective clothing when working
near batteries. Do not put tools or
other metal objects across the
battery terminals or the tops of
the batteries. NO SMOKING!
1. To inspect batteries, remove battery cover.
2.
Disconnect the batteries. Use a cloth and a
solution of ammonia or bicarbonate of soda to wipe
the top of the batteries. Clean the battery termi-
nals. Reconnect the batteries.
3.
Check dust bag and install new one if necessary.
WARNING: Maintenance and repairs must be
done by authorized personnel
only.
WARNING: Keep all fasteners tight.
Keep the machine clean, it will need fewer repairs and
have longer life
Do These Procedures When You Begin Your Work
Period
1. Make sure the pad housing and skirt are in correct
position.
2. Make sure the pad is installed correctly.
3. Check the pad and pad driver for damage.