Clarke Focus C23, Operator'S Manual, Page: 10 / 94

EN
ENGLISH
Page -10-
Clarke
®
Operator's Manual (EN) - FOCUS C28 and C33
MACHINE CONTROLS & FEATURES
Squeegee Lift Handle See Figure #3a, 3b, & 3c.
The squeegee lift handle is located below the control
handles on the right side. It is used to raise or lower the
squeegee. The vac motor is turned on when the handle is
lowered.
Parking Brake (Optional)See Figure #4.
The parking brake prevents movement of the machine.
The brake is located on the left hand side of the transaxle
motor. Turn the key switch off or disconnect the power to
the battery to apply the brake.
There is a mechanical lever located on the brake. This
lever is an override. To manually release the brake, rotate
the lever toward the rear of machine (counter clockwise).
To return the brake to normal or to apply the brake, rotate
the lever towards the front of the machine (clockwise).
NOTE: If the lever is left in the override position, the
brake will not function with the key switch, and the
machine will not operate.
CAUTION: Do not activate the brake while the ma-
chine is moving.
Float Shut Off See Figure #5.
The shut-off switch for the vac motor is located in the
recovery tank. It automatically turns off the vac motor
when the recovery tank is full.
Figure #3a
Figure #3b
Figure #3c
Figure #5
Figure #4