Clarke ED160A Operation & Maintenance Instructions Manual Download Page 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE product, designed for boring holes in soil 
for fence posts, reforestation, and similar operations.

Before attempting to operate the machine, it is essential that you read this 
manual thoroughly and carefully follow all instructions given. In doing so you 
will ensure the safety of yourself and that of others around you, and you can 
also look forward to the machine giving you long and satisfactory service.

OVERVIEW

The Earth Borer comprises two major components.....the drive mechanism, 
(engine and gearbox), and an auger (ordered as a separate item on page 
13).

The machine is designed for one man operation, but some exertion may be 
necessary due to the forces involved, the type of soil being worked and the 
uncertainty of what lies below the surface.

Care must therefore be exercised when using the machine, as it may lurch 
suddenly if, for example it comes into contact with strong tree roots or grabs 
on dense clay etc. All of these possibilities should be considered.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of 
12 months from the date of purchase. Please keep your receipt as proof of 
purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission.

This guarantee does not effect your statutory rights.

Summary of Contents for ED160A

















Reviews: