12/13
A - 3
56091113 - DirectAir Pro
ENGLISH - A
INSTRUCTIONS FOR USE
BASIC OPERATION
1) Check the machine for any obstructions in fan prior to operation.
•
If an item blocks the intakes of the air mover, this will hurt the performance of the machine, and could cause the motor to overheat.
2) Adjust machine to desired position for operation by pulling it back to its preset height adjustments.
3) Plug power cord into a grounded outlet.
•
Do not use an extension cord in conjunction with the standard power cord.
4) This machine has 3 power settings. Turn the power knob to the desired speed.
•
Low = 1 Med = 2 High = 3.
5) To stop the machine at any time, simply turn the power knob to the “off” position.
•
Never stick any object into the air inlet vents or the air outlet vent.
DAISY CHAIN
The DIRECTAIR PRO can be connected in a “Daisy Chain” allowing
for two (2) additional DIRECTAIR PRO units to work together on one
circuit.
•
Only use DIRECTAIR PRO units together in the daisy chain.
NOTE: The Air Mover has an onboard circuit breaker. If the auxiliary
outlet overloads, the circuit breaker will trip. If the breaker trips, unplug
the units and press the circuit breaker reset button. Plug the units
back into the power source and turn on the switch.
MAINTENANCE
To keep this machine performing well for many years, please follow the
following maintenance procedures:
Always con
fi
rm the machine is unplugged from the power source
prior to performing any maintenance or repairs!
1) Unplug machine as soon as you are done using it.
2) Wrap the power cord around the carrying handle.
3) Check power cord for any damage. If any damage is detected,
replace the cord immediately.
4) Lubricate the handle assembly and wheels with a water resistant
lubricant every month.
5) Check machine for loose or missing nuts and bolts, and replace
as necessary.
6) Clean the outside of the machine with a mild cleaner.
AIR MOVER STORAGE
Air Movers can be stacked (up to 4) on their sides for storage.
NOTICE:
1) Stacking feature is not secure for transportation.
2) Remove
the
fi
lters before stacking.
