8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
The user should purchase a suitable connecting lead as shown in the diagram,
which is compatible with the appliance socket. The unit requires 5 pins
including a master earth pin, and is suitable for AC 380/415v, 50/60Hz with a
capacity of 16A/6h (Devil 6005 and 6009) or 32A/6h (Devil 6015) and rated at
IP44 class (or better) insulation. A length of 2-3 metres is recommended
asgiving mobility to the appliance but without becoming a trip hazard.
The plug incorporates a hood which will secure the cable in position when
engaged with the appliance.
If in any doubt, consult a qualified electrician. DO NOT attempt any electrical
repairs yourself.
OPERATION
The Devil range of fan assisted electric heaters are suitable for household
(Devil 6003 only) or workshop/factory use. They incorporate a thermostat
which detects the temperature of the room air and controls the heater to
maintain a pre-selected temperature between 0 & 40°C. A manually reset
thermal cutout is provided for safety in the event of overheating on the 6005,
6009 & 6015 models. The 2kw and 3kw units are fitted with a self-resetting
thermal cutout. The fan motor runs independently of the thermostat and
continues running after the heating element has been switched off.
With the heater sited on a firm level surface and at a safe distance from
flammable objects (in compliance with all safety precautions), plug the
heater into the mains and set the thermostatic control to the maximum
temperature setting. Switch the heater on to one of the following power
settings. Once the room reaches the required temperature, you should turn
the thermostatic control slowly anti-clockwise until the heater switches off. The
heater will now start and stop automatically to maintain the room
temperature.
Summary of Contents for Devil 6003
Page 20: ......
