15
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
FITTING DOOR LOCK
IMPORTANT: Ensure the key remains in the lock until lock is fully fitted.
1. Remove the locking lever securing screw and lock washer from the lock
assembly, remove the lever, spring washer and washer noting which way
round they are fitted for reassembly.
• Take care to ensure the barrel does not fall out of the lock body.
2. Unscrew and remove the large securing nut, insert the lock into the hole in
the door, refit the large securing nut and tighten with spanner,
• DO NOT overtighten.
3. Turn the key fully anticlockwise (locked position), fit the lever as shown
4. Secure the lever with the spring washer, washer and securing screw.
5. Check that the lock works properly i.e. anticlockwise = locked and
clockwise = unlocked.
CWB1700P.fm Page 15 Wednesday, November 27, 2019 11:49 AM
