5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
THE TABLE TOP
1. Turn the table top face
down and attach the
two drawer runners as
shown in fig 4, using
three wood-screws
each side in the pre-
drilled holes in the table
top.
2. The table is now ready
to be assembled to the
cabinet.
3. With the table top remaining face down, position the cabinet on top with
the feet uppermost.
NOTE: The front of the table top is the edge closest to the drawer runners.
Take care to align this with the front of the cabinet.
4. Line up the holes in the legs with the pre-drilled holes in the table top and
locate with wood-screws. Tighten fully.
5. Turn the structure back onto its feet.
THE DRAWER & SHELF
The drawer comprises:
2 x Side Panels, I x Front Panel, 1 x Back Panel, 1 x Bottom Panel
1. Having identified the various
parts as in Fig 5, bolt the side
panels to the front panel as
shown, then add the back
panel with all fastenings only
finger tight.
2. Drop in the bottom panel and
secure with bolts, nuts and
washers.
3. Ensure the drawer is square
before tightening all the nuts.
4. Slide the drawer into place beneath the table top.
5. Position the shelf on the shelf supports.
Your workbench is now fully assembled and ready for use.
Summary of Contents for CWB1250
Page 8: ......
