3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CONSTRUCTION
The cabinet body is constructed from 6 panels plus the door. The top and
bottom panels are identical, but the side panels are of two types, one with a
shelf support and one without. The unit can be assembled either with the open
shelf to the left or right, with the closed cupboard on the other side.
Care must be taken to ensure they are assembled correctly by taking note of
the instructions and referring to the appropriate diagram.
All fixing bolts should be entered from the outside and secured on the inside
by the flat washers and nuts provided. Assembly should be carried out with all
nuts finger tight only - DO NOT tighten the nuts until the structure is fully
assembled as described in the instructions.
You will find it easier and more comfortable to assemble the cabinet,
complete with legs, on a workbench if available. Additionally, it is easier and
quicker if an assistant screws on the nuts from inside the cabinet whilst the bolt
is held on the outside.
NOTES:
1. Decide whether you require the enclosed cupboard to be on the left or
right side of the assembly.
2. Assembly is simplified if an extra pair of hands is available.
3. All fixing bolts should be finger tight ONLY, until the complete structure is
assembled.
4. Assemble on a workbench with suitable free working area.
The assembly procedure is as follows:
THE CABINET
The front edge of each top/
bottom panel is folded to form
a channel, as shown in fig 1.
1. Lay one such panel,
(channel facing
downwards), with a side
panel positioned alongside
as shown.
•
The bottom panel should sit
on top of the lower lip of
the side panel.
2. Secure with two bolts, flat
washers and nuts.
Summary of Contents for CWB1250
Page 8: ......
