13
SQUARING THE SAW TABLE TO THE BLADE
1. Loosen the pressure plate
adjustment knob.
2. Raise the pressure plate and lock
it in the raised position.
3. Loosen the table lock knob and
tilt the table until it is
approximately at right angles to
the blade.
4. Place a small square on the saw
table next to blade and lock the
table at 90° to square.
5. Retighten the table lock knob
SETTING THE SCALE INDICATOR
6. Loosen the securing screw holding
the scale indicator. Move the
indicator to the 0° mark and
securely tighten the screw.
• Remember, the scale is a guide
only and should not be relied
upon for precision.
• Make practice cuts on scrap
material to ensure your angle
settings are correct.
7. Lower the pressure plate so it just rests on top of the workpiece and secure
in place.
WARNING: TO AVOID ACCIDENTAL STARTING WHICH COULD RESULT IN
SERIOUS INJURY, TURN THE SAW OFF, AND UNPLUG THE SAW FROM THE
POWER SOURCE.
